为了更好地保证陶瓷棉板产品质量，以达到应尽的使用效果，本厂对陶瓷棉板产品的安装和施工特制定如下条例：
对于要求施工的表面应先进行除锈、除油、除污的工作，使其尽量保持干净和整洁。
在对要求施工的钢板表面，焊上相应数量的碰钉，碰钉长度一般需超出陶瓷棉板产品总厚的20mm-30mm，碰钉的数量一般每平方米不得少于16只，必须达到陶瓷棉板产品上在钢板上的牢固性。
产品在开箱之前应根据船舶设计部门所设计要求的容量和规格，使之相符合，然后再开箱，将产品轻轻拿出展平。
陶瓷棉板应平整，均匀地放置在已焊上碰钉的钢板上，使碰钉穿过棉板的表面20mm-30mm，同时两块陶瓷棉板之间应靠紧，使之缝道小。对于有二层以上的施工，应将上下两层的陶瓷棉板的缝道错开，以达保温吸音效果。然后用锁紧压片，锁紧压平。碰钉露出锁压片部分，可根据空间距离，选择向边弯曲或压平，然后进行后续装饰面板的安装。
为了达到完美的施工效果，在施工中对于需要裁剪的陶瓷棉板产品应做到裁剪行直、平整、对于裸露的地方，应重新用阻燃胶水将玻璃丝布粘贴，对于两块陶瓷棉板之间的缝道也应用阻燃胶水将玻璃丝布粘贴住，以达到施工效果的平整、美观和完整性。
In order to better ensure the ceramic fiber board product quality, in order to reach should try using effect, the factory of ceramic fiber board product installation and construction specially make the following regulations:
For the requirements of the construction of surface shall be rust, degreasing, cleaning work, so try to keep it clean and tidy.
On the requirements of the construction of the plate surface, welding a corresponding number of touch nails, nail length generally touch beyond ceramic cotton board product total thickness of 20mm-30mm, touch nails volume is average every square metre of not less than 16, to reach the ceramic fiber board products on the steel firm.
Products in the box before the ship design department should be based on the design requirements and specifications capacity, making the match, and then out of the box, products will be gently pulled out flattening.
Ceramic fiber board should be flat, evenly placed in welding touch the nail plate, so that the touch nails through the cotton plate surface 20mm-30mm, while two ceramic cotton board should close the gap, minimum. For more than two layers of construction, should be the upper and the lower two layers of ceramic fiber board seam stagger, so as to achieve the optimum insulation sound-absorbing effect. Then use the lock cover, locking out. Touch the nail with lock pressing part, according to the space distance, chose to side bending or pressing, and then follow-up decorative panel installation.
In order to achieve perfect construction effect, in the construction of the need for cutting ceramic fiber board product should be cut line straight, smooth, the exposed areas, should be flame-retardant glue glass cloth paste, for two pieces of ceramic fiber board between the seam and application of flame retardant glass cloth paste glue will live, in order to achieve the construction effect of smooth, beautiful and integrity.
技术热线：
复制产品链接
长按图片保存/分享
陈国强